US $335.39
Original Price : US $389.99 (14%)
Limited Price Full Set DIY FPV Drone S600 4 axle Aerial Quadcopter w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700k with Free Worldwide Shipping!
4.70
Related Products :
DIY Drone Model kit Multi QuadCopter UFO ARF KK V2.3 Circuit board+1000KV Motor+30A ESC+Lipo+F450 Flamewheel+8ch TX&RX+propeller
Full Set DIY FPV Drone Model 4-axle Aircraft Kit HJ 450 Frame PX4 Flight Control 920KV Motor GPS FS-i6 Remote Controller Props
Flysky FS-i6X 2.4G 10CH/6CH Transmitter TX Remote Controller For Helicopter Fixed-wing Glider Multi-axis RC Drone Quadcopter
ARF/PNP Kit DIY Full Set Hexacopter GPS Drone Aircraft Kit Tarot FY690S Frame 750KV Motor PIX 2.4.8 32 Bit Flight Controller
Product description
[32802586665]Make a DIY drone by yourself becomes easy and interesting
Join us to start building a Quadcopter.
Full Set,including all the parts need for a drone.
S600 4 axis Aerial Camera Drone Quadcopter DIY FPV Welded Kit Unassembled w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor AT9S Battery
Use Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD and 7M GPS- The board integrates with PX4FMU+PX4IO- Pixhawk is with new 32 bit chip and sensor technologyFeatures:- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;- 14* PWM/ actuator output;- Bus interface (UART, I2C, SPI, CAN);- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;- Provide automatic and manual mode;- Provide redundant power input and fault transfer function;- Color LED lamp;- Multi tone buzzer interface;- Micro SD to record flight data;Processor:- 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit- Main frequency: 256K, 168MHZ RAM- 32 bit STM32F103 backup co processorSensor:- L3GD20 3 axis digital 16 bit gyroscope- LSM303D 3 axis 14 bit accelerometer /magnetometer- MPU6000 6 axis accelerometer / magnetometer- MS5611 high precision barometerInterface:- 5* UART, 1*compatible high voltage, 2*hardware flow control- 2* CAN- DSM/DSM2/DSM-X satellite receiver compatible input- Futaba SBUS compatible input and output- PPM signal input- RSSI (PWM or voltage) input- I2C- SPI- 3.3 and 6.6VADC input- External USB MICRO interfaceAll motors and ESC has been Welded before shipping,what you need to do is assemble it and fly
S600 Super Hard Arm 4-Axis Rack Quadcopter Frame Kit with LandingGear Skid makes your DIY Drone looks cool and strongWheelbase: 600mm two optional
Tripod height: 250mm
Maximum available paddle:
S600 / 15 inch
Weight:
S600 / 860g
Upper and lower center plate middle height:
S600 / 36mm
AT9S Specification1. Size: AT9S- 183*100*193mm, R9DS- 41*23*14mm2. Weight: 0.88kg3. Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz)4. Modulation mode: QPSK5. Channel bandwidth: 5.0 MHz & 250Kbps6. Spread spectrum: DSSS ;FHSS7. Adjacent channel rejection: >38dbm8. Transmitter power: <100mW (20dbm )9. Operating current: <90mA 12V10. Operating voltage: 7.4 ~ 18.0V11. Control distance: more than 900 meters ground, 1500 meters air, the actual control distance depends on the flying environment12. Channel: 10 channels, 5-10 channels are customized13. Compatible model: include all 120 degree and 90 degree swash-plate helicopter, all fix wings, glider and multi-rotor14. Simulator mode: under the simulator mode the transmitter action turn off, change to power saving mode15. Screen: 2.8 inches 16 colorful screen, 240*320 pixels16. Support receivers: sells with R9DS (SBUS;PWM) ;Also support R10DS(SBUS PWM) and R6DS(SBUS;PPM;PWM)
R9DS 2.4G 9CH DSSS Receiver
11.1V 4400MAH 30C 3S1P Lipo Battery xt60 Plug and Charger
