US $37.99
Original Price : US $39.99 (5%)
Limited Price Hitec HS-645MG Metal High Torque Standard Servo RC helicopter Servo RC airplane drone accessories with FREE Worldwide Shipping!
4.34
Related Products :
Hitec HS-85MG metal high torque steering gear servo for fixed wing aircraft RC helicopter RC drone accessories
Tarot-RC 450pro series metal tail shaft tail gear box / tail box assembly bright silver TL45038-04 black TL45038-01 for Tarot 45
Tarot-RC 450 Flybarless Helicopter Part Tarot DFC Main rotor head set Black silvery white TL45162-A TL45162-B
Tarot-RC 450pro series high torque tail drive shaft TL45054 for 450pro series helicopter
Product description
[32858627451]Hitec HS-645MG Metal High Torque Standard Servo RC helicopter Servo RC airplane drone accessories
Products Description:
FEATURES:
Three metal gears.
Dual ball bearings.
Metal 1st Gear.
Four adjustable splined horns.
For use with .60 size helicopters, glow or electric cars and boats.
INCLUDES:
One ultra torque servo with 11.5" connector wire.
One white small X-shaped servo horn.
One red Large X-shaped servo horn.
One white adjustable servo horn.
One white offset straight servo horn.
Four 2 x 14mm mounting screws
Four brass eyelets
Four black rubber vibration isolators.
SPECS:
Speed: 0.24 sec/60° at 4.8V
0.20 sec/60° at 6.0V
Torque: 106.93 oz-in at 4.8V (7.7 kg-cm)
133.31 oz-in at 6.0V (9.6 kg-cm)
Length: 1.59" (40.6mm)
Width: 0.77" (19.8mm)
Height: 1.48" (37.8mm)
Weight: 2.11oz (60g)
Control System:+Pulse Width Control 1500usec Neutral
Required Pulse:3-5 Volt Peak to Peak Square Wave
Operating Voltage:4.8-6.0 Volts
Operating Temperature Range:-20 to +60 Degree C
Operating Speed (4.8V):0.24sec/60° at no load
Operating Speed (6.0V):0.20sec/60° at no load
Stall Torque (4.8V):106.93 oz/in. (7.7kg.cm)
Stall Torque (6.0V):133.31 oz/in. (9.6kg.cm)
Operating Angle:45 Deg. one side pulse traveling 400usec
360 Modifiable:Yes
Direction:Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V):8.8mA/idle and 350mA no load operating
Current Drain (6.0V):9.1mA/idle and 450mA no load operating
Dead Band Width:8usec
Motor Type:3 Pole Ferrite
Potentiometer Drive:Indirect Drive
Bearing Type:Dual Ball Bearing
Gear Type:3 Metal Gears and 1 Resin Metal Gear
Connector Wire Length:11.81" (300mm)
Dimensions:1.59" x 0.77"x 1.48" (40.6 x 19.8 x 37.8mm)
Weight:1.94oz. (55.2g)
